With the two side pieces completed, we now connect them by placing three pieces of tubing between them. The top piece is slightly shorter than the bottom two pieces to allow for the shape of the grill.



Holes are drilled on both sides to later secure the grill.
Pictured below you will see where and how the nose piece is secured to the body.





The support for the front the frame is welded on, in the shape of a "V". An "L" shape piece of steel is welded at the bottom of the "V" and a hole drilled. This is where the front nose section will be secured to the front of the chassis.



The grill will be added permanently after everything is painted.





Revised 05/24/2002 Cabriolet - / - Ann's Car - / - Step Index - / - Previous Step - / - Next Step